Professional marine service
Welcome to Wake Workshop, a professional marine service company dedicated to yacht repair, boat maintenance, technical inspections, refit work, and seasonal preparation. We help yacht owners, boat owners, captains, charter operators, and marine businesses keep their vessels safe, reliable, efficient, and ready for the water.
A yacht or boat is more than a recreational asset. It is a complex technical environment that combines propulsion systems, electrical equipment, navigation instruments, hydraulic components, plumbing, structural elements, interior systems, and exterior finishes. Every part must operate correctly, especially when the vessel is far from shore or exposed to changing weather and sea conditions. Regular maintenance is therefore essential for safety, performance, comfort, and long-term value.
At Wake Workshop, we provide practical and carefully planned solutions for motor yachts, sailing yachts, cruisers, RIB boats, fishing boats, motorboats, tenders, and other recreational vessels. Whether your boat needs routine engine servicing, fiberglass repair, electrical troubleshooting, hull maintenance, antifouling preparation, navigation equipment installation, or complete seasonal inspection, our team is ready to help.
Our marine repair approach combines detailed diagnostics, careful workmanship, clear communication, and preventive maintenance. We do not simply repair visible damage and send the vessel back into operation. We look for the reasons behind the problem, assess related systems, and recommend solutions that support dependable performance over time.
From a small boat engine service to a larger yacht refit project, Wake Workshop aims to make every stage organized and transparent. We can assist with initial inspection, repair planning, technical maintenance, replacement of worn components, system upgrades, cosmetic restoration, and final checks before launch or departure.
Our goal is simple: to help you enjoy your time on the water with greater confidence.
About Us
Wake Workshop was created for vessel owners who expect more from a marine repair company than a quick temporary fix. We understand that boat maintenance requires technical knowledge, attention to detail, and respect for the unique construction of every vessel.
Each yacht and boat has its own maintenance history, equipment configuration, operating environment, and specific requirements. A vessel used in saltwater may need different corrosion protection than a boat used mainly in freshwater. A frequently chartered yacht may require more regular inspection than a privately used weekend boat. An older vessel may benefit from system upgrades, while a newer boat may primarily need scheduled servicing and preventative checks.
For this reason, we begin with an assessment rather than applying the same service package to every client. We inspect the condition of the vessel, review the symptoms reported by the owner or captain, identify areas of wear, and establish a practical work plan.
Our team can work with a wide range of marine systems, including:
We believe that good service starts with clear communication. Before work begins, we explain what has been found, which repairs are urgent, what can be scheduled later, and how each recommendation affects the safety or performance of the vessel. Our clients receive a straightforward overview of the proposed work instead of vague technical language.
Wake Workshop also emphasizes preventive maintenance. It is usually easier and more economical to replace a worn belt, corroded connection, damaged hose, or weak battery before it causes a larger failure. Regular checks can reduce downtime, improve fuel efficiency, protect onboard equipment, and extend the service life of major components.
Whether you need help preparing for a new boating season or want to restore a vessel after years of use, our team can develop a maintenance strategy suited to your boat and your plans.
Inspection · Diagnosis · Restoration
Advantages
Reliable marine service is not only about fixing a failed component. It is about understanding the vessel, preventing avoidable breakdowns, and making sure that the work remains dependable after the boat returns to the water.
Instead of focusing on only one component, we consider how different systems work together. Engine issues may be related to fuel delivery, cooling, electrical supply, or transmission load. Water damage may involve seals, plumbing, hull fittings, or bilge systems. A broader view often leads to a more effective repair.
We explain our findings in an understandable way and separate urgent safety-related repairs from recommended maintenance and optional improvements. This allows owners to make informed decisions according to their schedule and budget.
Marine equipment operates in a wet, salty, vibrating environment. Small details matter, including cable protection, hose routing, clamp condition, surface preparation, sealant application, and corrosion prevention. We pay attention to these details because they affect long-term reliability.
Our objective is not only to repair what has already failed. We also help identify worn components and developing problems before they cause downtime. Preventive care can extend equipment life and make boat ownership more predictable.
We work with the needs of various boats, including sailing yachts, motor yachts, cruisers, RIBs, fishing boats, tenders, and recreational motorboats. Our approach is adapted to the vessel’s size, construction, age, usage, and equipment.
A yacht or boat represents a significant investment. We handle the vessel carefully and take into account its finish, interior, hardware, personal equipment, and onboard systems. We aim to leave the work area clean, organized, and ready for the next stage.
Boat owners often have limited service windows between trips, charters, storage periods, and marina bookings. We help prioritize the work so that essential repairs can be completed first and additional improvements can be planned logically.
We believe that the owner or captain should know what is being done and why. Our communication is based on clear descriptions, practical recommendations, and agreed work scopes.
Reliable vessel maintenance is an ongoing process. We aim to support owners not only during emergencies but also through annual inspections, seasonal preparation, technical upgrades, and long-term care planning.
Services
Wake Workshop provides a broad range of yacht repair and boat maintenance services. Each service can be arranged as a standalone task or combined into a larger inspection, seasonal preparation, or refit program.
Accurate diagnosis is the foundation of an effective marine repair. We inspect the vessel to identify visible damage, abnormal operation, leaks, corrosion, wear, and performance issues.
Depending on the project, our inspection may include engine starting and operating behavior, unusual vibrations, noises, smoke or overheating, fuel consumption and loss of power, battery condition, charging performance, electrical connections, fuses, distribution panels, bilge pumps, water detection, steering response, propeller, shaft, rudder and drive components, hull condition, deck hardware, hatches, windows, seals, navigation, communication, and safety equipment.
A detailed inspection helps prevent unnecessary part replacement and allows us to identify related issues before they become more expensive.
The engine is one of the most important systems on any motor yacht or boat. A well-maintained engine provides dependable propulsion, predictable fuel consumption, and greater confidence during coastal or offshore travel.
Our engine maintenance services may include engine oil and filter replacement, fuel filter and water separator service, inspection of belts, hoses, clamps and connections, cooling system inspection, exhaust system checks, battery and starter testing, diagnostic testing for irregular performance, fuel line inspection, drive belt and pulley checks, transmission and gearbox checks, and preparation for seasonal launch or storage.
If your engine is difficult to start, loses power, overheats, produces unusual smoke, consumes more fuel than usual, or operates with excessive vibration, early inspection is strongly recommended. Ignoring these signs can turn a manageable repair into a major mechanical problem.
Outboard engines are exposed to water, salt, impact, vibration, and changing weather conditions. Their reliability depends on regular inspection and correct seasonal care.
Wake Workshop can assist with outboard motor checks, servicing, and repair. We inspect the propeller, gearcase, mounting points, controls, cooling passages, fuel system, electrical connections, and sacrificial anodes. We also check for signs of corrosion, impact damage, water contamination, and abnormal movement.
A damaged propeller may reduce performance and place additional strain on the engine. Corrosion around electrical connections can cause intermittent faults. A restricted cooling passage can lead to overheating. Regular outboard maintenance helps protect the motor and keeps the boat responsive and efficient.
Inboard propulsion systems require careful attention to the engine compartment, cooling circuit, exhaust, transmission, shaft line, mounts, and ventilation. We examine the complete system rather than treating the engine as an isolated component.
Our work may include engine servicing, inspection of the gearbox, checking shaft alignment, examining flexible couplings, reviewing engine mounts, and identifying signs of oil or coolant leakage. We also inspect hoses and clamps in areas that may be difficult for the owner to access during normal use.
A well-maintained transmission and shaft system can help reduce vibration, protect the engine, and improve power transfer to the propeller.
Fiberglass boats can suffer from cracks, punctures, impact marks, delamination, gelcoat damage, and structural weakness. Some damage is cosmetic, while other defects may affect the strength or watertight integrity of the hull.
We provide fiberglass and composite repair for selected areas of hulls, decks, consoles, lockers, steps, transoms, and other components. The repair process may involve removing damaged material, preparing the surface, rebuilding the structure, laminating new composite layers, fairing the repaired area, and preparing it for gelcoat or paint.
It is important to address cracks and water ingress early. A small damaged area may become more difficult to repair if moisture enters the laminate or if repeated movement causes the defect to spread.
The underwater part of the vessel affects speed, fuel consumption, maneuverability, and structural protection. We assist with hull inspections, surface preparation, cleaning, and maintenance planning.
The inspection may identify scratches, dents, impact damage, blisters or signs of osmosis, flaking or failed antifouling, corrosion around metal fittings, damaged anodes, propeller or rudder problems, water ingress around through-hull fittings, and issues with seacocks and underwater valves.
A clean and properly protected hull helps the vessel move efficiently through the water. It also supports the performance of the propeller, reduces resistance, and protects the surface from marine growth.
Antifouling maintenance is an important part of boat ownership, particularly for vessels that remain in the water for extended periods. Before applying a new protective coating, the existing surface must be evaluated and properly prepared.
Our service may include surface cleaning, removal of loose or failed material, sanding, masking, priming of selected areas, and preparation for antifouling application. We also inspect the hull for related issues that may be hidden beneath old coatings.
The correct preparation method depends on the condition of the existing coating, the hull material, the vessel’s use, and the type of product selected.
Sunlight, saltwater, dock contact, dirt, and general use gradually affect the exterior appearance of a yacht or boat. Faded gelcoat, light scratches, oxidation, stains, and small chips can make a well-maintained vessel look neglected.
Wake Workshop provides cosmetic restoration services designed to improve the appearance and protect exposed surfaces. Depending on the condition of the vessel, we may carry out cleaning and decontamination, oxidation removal, gelcoat spot repair, surface sanding and fairing, polishing and machine compounding, protective wax or surface treatment, localized painting, and preparation of larger areas for refinishing.
Proper surface preparation is essential. Polishing a contaminated or badly damaged surface without preparation may provide only a temporary improvement. We select the appropriate process according to the material and the level of deterioration.
Marine electrical systems operate in a demanding environment. Moisture, salt, vibration, heat, poor connections, and overloaded circuits can create recurring electrical problems.
We inspect and troubleshoot electrical systems associated with batteries and battery switches, shore power connections, battery chargers and inverters, navigation lights, interior and exterior lighting, bilge pumps, refrigeration and climate-control equipment, navigation instruments, communication equipment, distribution boards and fuses, electric toilets, and freshwater pumps.
We look for loose terminals, damaged insulation, corrosion, incorrect connections, overloaded circuits, and inadequate protection. When repairs are completed, the affected system is tested to confirm stable operation.
Modern boats often depend on chartplotters, GPS systems, depth sounders, radar, autopilots, VHF radios, AIS equipment, cameras, and digital monitoring systems.
Wake Workshop can assist with the installation, replacement, configuration, and troubleshooting of selected marine electronics. We consider the position of the display, access to controls, cable routing, protection from moisture, power supply, and compatibility with existing equipment.
A clean installation should be safe, practical, and easy to use. Cables must be secured, connectors protected, and equipment positioned so the skipper can operate it without distraction.
Reliable steering is essential for safe maneuvering in marinas, coastal waters, and open water. Difficulty turning the wheel, excessive play, delayed response, unusual noises, or hydraulic fluid loss should be inspected promptly.
We help diagnose and repair selected steering and control components, including cables, hydraulic lines, pumps, cylinders, fittings, and mechanical connections. We also inspect rudders, linkages, brackets, and related hardware where accessible.
A complete check helps determine whether the issue comes from the steering system itself, the drive, the rudder, the propeller, or a combination of components.
Water management is critical on any vessel. Bilge pumps, freshwater systems, holding tanks, seacocks, hoses, and drains require regular checks to prevent leaks and unpleasant failures.
We inspect pumps, hoses, clamps, valves, filters, and accessible connections. We can assist with replacement of worn hoses, faulty pumps, damaged fittings, and selected plumbing components.
Bilge pump testing is particularly important. A pump that does not activate correctly, has a blocked intake, or relies on a weak electrical connection may fail when it is needed most.
Before launching a boat after winter storage, many systems should be inspected. Wake Workshop can help prepare your yacht or boat for the boating season.
Seasonal preparation may include engine and transmission checks, battery testing and charging, cooling and fuel system inspection, bilge pump testing, steering and control checks, navigation light inspection, hull and deck review, safety equipment overview, leak and seal inspection, cleaning, polishing, and surface preparation.
A planned pre-season inspection gives owners time to correct problems before holidays, charter bookings, or important trips.
Correct winterization helps protect the vessel during periods of inactivity. Depending on the climate, storage location, and engine type, the process may include preparing the cooling system, changing fluids, protecting fuel components, checking batteries, cleaning the hull, ventilating interior areas, and covering sensitive equipment.
We can help create a storage checklist for the vessel and identify areas that require special attention. Good preparation can reduce corrosion, moisture damage, frozen components, unpleasant odors, battery failure, and spring commissioning delays.
Some owners want to improve an older vessel rather than replace it. A refit may include technical upgrades, cosmetic improvements, new navigation equipment, electrical modernization, interior restoration, or improvements to comfort and storage.
Wake Workshop can help plan selected refit tasks and coordinate the work required to improve usability, reliability, and appearance. We focus on practical upgrades that match the vessel’s purpose and the owner’s priorities.
Our process
Every service project follows a clear sequence so that the owner understands what is happening and why each stage matters.
Contact Wake Workshop with information about your vessel, its location, the type of engine, and the issue you are experiencing. If possible, provide photographs, videos, previous service notes, or dashboard warnings.
We review the information and determine whether the next step should be a visual inspection, technical diagnosis, seasonal service, or immediate repair evaluation.
Our specialists inspect the relevant systems and document visible defects, wear, corrosion, leaks, and operational symptoms.
We prepare a practical list of recommended services. The work is organized according to safety, urgency, vessel use, available parts, and the owner’s priorities.
The approved work is completed with attention to correct installation, protection from moisture, structural integrity, and reliable system operation.
After the repair, the affected equipment is tested. We review the completed work and identify any follow-up observations or recommended maintenance dates.
For owners who want to reduce unexpected problems, we can help establish a recurring inspection and maintenance schedule for the yacht or boat.
Contact Wake Workshop
If you need yacht repair, boat maintenance, engine servicing, fiberglass restoration, marine electrical diagnostics, hull care, navigation equipment installation, seasonal preparation, or winterization, contact Wake Workshop.
We can begin with a conversation about the vessel and the problem you are experiencing. When contacting us, please include the vessel type, model, approximate year, engine information, current location, and a short description of the requested work.
Photographs of the hull, engine compartment, dashboard, electrical panel, or damaged area can help us assess the situation more efficiently.
We support both individual vessel owners and marine professionals looking for reliable technical assistance. Every project begins with clear information, careful evaluation, and a practical plan.